Shopping Cart
  • Remove All
  • TargetMol
    Your shopping cart is currently empty

Atrasentan

🥰Excellent
Catalog No. TQ0259Cas No. 173937-91-2
Alias ABT-627, A-147627, (+)-A 127722

Atrasentan (ABT-627) is an endothelin receptor antagonist that can inhibit the activity of ETA (IC50 value is 0.0551 nM).

Atrasentan

Atrasentan

🥰Excellent
Purity: 99.08%
Catalog No. TQ0259Alias ABT-627, A-147627, (+)-A 127722Cas No. 173937-91-2
Atrasentan (ABT-627) is an endothelin receptor antagonist that can inhibit the activity of ETA (IC50 value is 0.0551 nM).
Pack SizePriceAvailabilityQuantity
1 mg$41In Stock
5 mg$97In Stock
10 mg$139In Stock
25 mg$278In Stock
50 mgInquiryIn Stock
1 mL x 10 mM (in DMSO)$123In Stock
Bulk & Custom
Add to Cart
Questions
View More

Related Compound Libraries of "Atrasentan"

Select Batch
Purity:99.08%
Contact us for more batch information
Resource Download
All TargetMol products are for research purposes only and cannot be used for human consumption. We do not provide products or services to individuals. Please comply with the intended use and do not use TargetMol products for any other purpose.

Product Introduction

Bioactivity
Description
Atrasentan (ABT-627) is an endothelin receptor antagonist that can inhibit the activity of ETA (IC50 value is 0.0551 nM).
Targets&IC50
ETA:0.055 nM
In vitro
Method: Atrasentan (ABT-627) (10μM, 24 hours) was used to treat PPC-1-ET series cells and observe the cell growth.
RESULTS Atrasentan treatment significantly increased the number of apoptotic cells. [2]
In vivo
METHODS: Atrasentan (ABT-627)(20 mg/kg, intraperitoneal injection) was used to treat HT29 mice with human tumor xenografts to observe the effect of Atrasentan on tumor hypoxia.
RESULTS Atrasentan can significantly reduce tumor hypoxia. [1]
METHODS: Atrasentan (ABT-627) alone (20 mg/kg, po, daily) and docetaxel alone (5 mg/kg, i.p., every 3 days); ABT-627 (20 mg/kg, po daily) and docetaxel (5 mg/kg, intraperitoneal injection, once every 3 days) to treat tumor xenograft model mice, and observe tumor growth in the mice.
RESULTS Mice treated with the combination of Atrasentan + docetaxel had significantly lower tumor burden and growth rate than mice treated with Atrasentan or docetaxel alone. [2]
Kinase Assay
Cells are incubated and treated with Atrasentan. They are then washed twice with PBS and lysed in ice-cold lysis buffer [20 mM Tris (pH 7.4), 150 mM NaCl, 1% Triton X-100, 1 mM EDTA, 1 mM EGTA, 2.5 mM sodium PPi, 1 mM β-glycerophosphate, 1 mM sodium orthovanadate, 1 μg/mL leupeptin, and 1 mM PMSF]. The extracts are centrifuged to remove cellular debris, and the protein content of the supernatants is determined using the bicinchoninic acid (BCA) protein assay reagent. Proteins (150 μg) are incubated with gentle rocking at 4°C overnight with immobilized Akt antibody cross-linked to agarose hydrazide beads. After the Akt is selectively immunoprecipitated from the cell lysates, the immunoprecipitated products are washed twice with lysis buffer and twice with kinase assay buffer [25 mM Tris (pH 7.5), 10 mM MgCl2, 5 mM β-glycerol phosphate, 0.1 mM sodium orthovanadate, 2 mM DTT] and then resuspended in 40 μL of kinase assay buffer containing 200 μM ATP and 1 μg GSK-3α/β fusion protein. The kinase assay reaction is allowed to proceed at 30°C for 30 min and stopped by the addition of Lamelli SDS sample buffer. Reaction products are resolved by 10% SDS-PAGE, followed by Western blotting with antiphosphorylated GSK-3α/β antibody. For analysis of the total amount of Akt, 40 μg of protein from the lysate samples are resolved by 10% SDS-PAGE, followed by Western blotting with anti-Akt antibody [2].
Cell Research
All three prostate cancer cell lines (LNCaP, C4-2b, and PC-3 cells) are seeded at a density of 3 × 10^3 cells per well in 96-well microtiter culture plates. After overnight incubation, the medium is removed and replaced with a fresh medium containing different concentrations of ABT-627 (0-50 μM) diluted from a 10-mM stock. After 72 h of incubation with the drug, 20 μL of MTT solution (5 mg/mL in PBS) is added to each well and incubated further for 2 h. Upon termination, the supernatant is aspirated and the MTT formazan formed by metabolically viable cells is dissolved in isopropanol (100 μL). The plates are mixed for 30 min on a gyratory shaker, and the absorbance is measured at 595 nm on a plate reader [2].
Animal Research
YM598 (0.3, 1, and 3 mg/kg), atrasentan (0.3, 1, and 3 mg/kg), or 0.5% methylcellulose as vehicle is orally administered to rats with a dosing cannula. The dosing volume of the test substances and vehicle is set at 5 mL/kg. Approximately 20 min after administration of compounds, the rats are anesthetized with sodium pentobarbital, and then pithed and ventilated 30 min after dosing. Approximately 1 h after oral administration of compounds, big endothelin-1 (1 nmol/kg) is intravenously administered, and blood pressure is measured. In these two experiments, the dose of test compound that causes 50% inhibition (ID50) of the big endothelin-1-induced increase in diastolic blood pressure is determined by linear regression analysis [1].
AliasABT-627, A-147627, (+)-A 127722
Chemical Properties
Molecular Weight510.62
FormulaC29H38N2O6
Cas No.173937-91-2
SmilesC(O)(=O)[C@H]1[C@@H](N(CC(N(CCCC)CCCC)=O)C[C@@H]1C=2C=C3C(=CC2)OCO3)C4=CC=C(OC)C=C4
Relative Density.1.188g/cm3
Storage & Solubility Information
StoragePowder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice.
Solubility Information
DMSO: 9 mg/mL (17.63 mM)
Solution Preparation Table
DMSO
1mg5mg10mg50mg
1 mM1.9584 mL9.7920 mL19.5840 mL97.9202 mL
5 mM0.3917 mL1.9584 mL3.9168 mL19.5840 mL
10 mM0.1958 mL0.9792 mL1.9584 mL9.7920 mL

Calculator

  • Molarity Calculator
  • Dilution Calculator
  • Reconstitution Calculator
  • Molecular Weight Calculator

In Vivo Formulation Calculator (Clear solution)

Please enter your animal experiment information in the following box and click Calculate to obtain the mother liquor preparation method and in vivo formula preparation method:
TargetMol | Animal experimentsFor example, your dosage is 10 mg/kg Each animal weighs 20 g, and the dosage volume is 100 μL . TargetMol | Animal experiments A total of 10 animals were administered, and the formula you used is 5% TargetMol | reagent DMSO+30% PEG300+5% Tween 80+60% ddH2O. So your working solution concentration is 2 mg/mL。
Mother liquor preparation method: 2 mg of drug dissolved in 50 μL DMSOTargetMol | reagent (mother liquor concentration of 40 mg/mL), if you need to configure a concentration that exceeds the solubility of the product, please contact us first.
Preparation method for in vivo formula: Take 50 μL DMSOTargetMol | reagent main solution, add 300 μLPEG300TargetMol | reagent mix well and clarify, then add 50 more μL Tween 80, mix well and clarify, then add 600 more μLddH2OTargetMol | reagent mix well and clarify
For Reference Only. Please develop an appropriate dissolution method based on your laboratory animals and route of administration.
1 Enter information below:
mg/kg
g
μL
2 Enter the in vivo formulation:
% DMSO
%
%Tween 80
%ddH2O

Dose Conversion

You can also refer to dose conversion for different animals. More Dose Conversion

Tech Support

Please see Inhibitor Handling Instructions for more frequently ask questions. Topics include: how to prepare stock solutions, how to store products, and cautions on cell-based assays & animal experiments, etc

Keywords

Related Tags: buy Atrasentan | purchase Atrasentan | Atrasentan cost | order Atrasentan | Atrasentan chemical structure | Atrasentan in vivo | Atrasentan in vitro | Atrasentan formula | Atrasentan molecular weight