n-(dbco-peg-4)-n-biotin-peg4-nhs

N-(DBCO-PEG4)-N-Biotin-PEG4-NHS is a PEG-based PROTAC linker suitable for synthesizing PROTACs [1].

Thalidomide 4-fluoride (E3 ligase Ligand 4) (Cereblon ligand 4) is the Thalidomide-based Cereblon ligand. Thalidomide 4-fluoride can be used in the recruitment of CRBN protein. Thalidomide 4-fluoride (Cereblon ligand 4) can be connected to the ligand for IRAK4 protein by a linker to form PROTAC IRAK4 degrader-1.

N-Hydroxysulfosuccinimide sodium is a non-cleavable ADC linker used in antibody-drug conjugates (ADCs) synthesis.

N-Boc-4-pentyne-1-amine is an alkyl chain-based PROTAC linker compound used in the synthesis of PROTAC MG-277 [1].

Thalidomide-4-OH (E3 ligase Ligand 2) (Cereblon ligand 2) is the Thalidomide-based Cereblon ligand used to recruit of CRBN protein. Thalidomide-4-OH (Cereblon ligand 2) is a linker to form PROTACs

DSPE-PEG-OH (MW 2000) is a PEG-based PROTAC linker for PROTAC synthesis.

Butanoic acid, 4-[[2-(2,6-dioxo-3-piperidinyl)-2,3-dihydro-1,3-dioxo-1H-isoindol-4-yl]amino]- (4-[[2-(2,6-dioxopiperidin-3-yl)-1,3-dioxoisoindol-4-yl]amino]butanoic acid) is a Cereblon ligand with alkyl linker and terminal acid for onward chemistry.

N-piperidine Ibrutinib is a potent BTK inhibitor with IC50s of 51.0 for WT BTK and 30.7 nM for C481S BTK respectively. N-piperidine Ibrutinib can be used as a BTK ligand in the synthesis of a series of PROTACs, such as SJF620. SJF620 is a potent PROTAC BTK degrader with a DC50 of 7.9 nM.

m-PEG7-4-nitrophenyl carbonate is a PEG-based PROTAC linker used in PROTAC synthesis [1].

DBCO-PEG3-NHS ester is a degradable ADC linker that can be used to synthesize antibody-coupled active molecules.

BMS-1166-N-piperidine-CO-N-piperazine dihydrochloride, a resorcinol di-Ph ether scaffold-based programmed cell death-1 (PD-1) programmed cell death ligand 1 (PD-L1) inhibitor, inhibits the PD-1 PD-L1 interaction with an IC50 of 39.2 nM. It contains the target protein PD-1 PD-L1 ligand and PROTAC linker, which can be used to synthesize PROTAC PD-1 PD-L1 degrader-1 and has anticancer activity. Additionally, it serves as a diluent for the preparation of tablets for direct compression.

BSJ-4-116 is a highly potent and selective CDK12 degrader (PROTAC) with an IC50 of 6 nM. It downregulates DDR genes through a premature termination of transcription, primarily through increasing poly(adenylation).

DBCO-PEG4-NHS ester is a PEG-based PROTAC linker utilized in PROTAC synthesis[1].

N-Butanoyl-L-homoserine lactone (C4-HSL) is a cleavable ADC linker used in the synthesis of antibody-drug conjugates (ADCs). It exhibits antibacterial activity and is employed in antibacterial biofilm[1].

Amine-PEG-CH2COOH (MW 5000) is a PEG-based PROTAC linker that can be used in PROTAC synthesis.

Thalidomide 4'-ether-alkylC2-amine hydrochloride (halidomide-linker 6) is a synthesized E3 ligase ligand-linker conjugate.

N-Boc-PEG5-bromide is a cleavable ADC linker utilized in the synthesis of antibody-drug conjugates (ADCs) and serves as a PROTAC linker based on PEG and Alkyl ether.

N-Boc-cis-4-hydroxy-L-proline methyl ester serves as a non-cleavable linker in antibody-drug conjugate (ADC) synthesis and functions as an alkyl chain-based PROTAC linker for PROTAC construction [2].

DBCO-S-S-PEG3-biotin is a cleavable reagent for the introduction of a biotin moiety to azide-containing biomolecules using copper-free Click Chemistry. The disulfide bond in this linker can be cleaved with reducing agents such as DTT, BME, and TCEP to remove the biotin label. PEG linkers can also be used in the synthesis of PROTACs.

Pomalidomide 4'-PEG2-azide is a synthetic E3 ligase ligand-linker conjugate, comprising a Pomalidomide-based cereblon ligand and a linker.

Functionalized cereblon ligand for PROTAC research and development; incorporates an E3 ligase ligand plus a short PEG linker ready for conjugation to a target protein ligand. Part of a range of functionalized tool molecules for PROTAC R&D. This product has been recently renamed. The previous name for this product was Thalidomide - linker 11 PROTAC is a registered trademark of Arvinas Operations, Inc., and is used under license.

BMS-1166-N-piperidine-COOH is a chemical compound that functions as the BMS-1166-based moiety. It binds to the E3 ligase ligand through a linker, leading to the formation of PROTAC PD-1/PD-L1 degrader-1, which facilitates the degradation of PD-1/PD-L1. BMS-1166 demonstrates potent inhibition of PD-1/PD-L1 interaction, with an IC 50 of 1.4 nM. By antagonizing the inhibitory effect of the PD-1/PD-L1 immune checkpoint on T cell activation, BMS-1166 promotes T cell activation.

Negative control for TBK1 PROTAC 3i. Binds TBK1 with high affinity, but exhibits no significant degradation of TBK1. PROTAC is a registered trademark of Arvinas Operations, Inc., and is used under license.

N-Boc-PEG5-alcohol is a PEG-based linker for PROTACs that joins two essential ligands, facilitating the selective protein degradation through the ubiquitin-proteasome system within cells.

N-Mal-N-bis(PEG2-amine) is a polyethylene glycol (PEG)-based linker compound commonly used in the construction of PROTACs, or proteolysis-targeting chimeras[1].

Dde Biotin-PEG4-DBCO is a PEG-based linker for PROTACs that connects two essential ligands, facilitating selective protein degradation via the ubiquitin-proteasome system within cells.

N-(4-Carboxycyclohexylmethyl)maleimide is an alkyl chain-based PROTAC linker suitable for synthesizing PROTACs [1].

N-(acid-PEG3)-N-bis(PEG3-azide) is a PEG-based PROTAC linker used in PROTAC synthesis [1].

Fmoc-N-PEG24-acid is a PEG-based linker for PROTACs, crucial for connecting two essential ligands to form PROTAC molecules. This linker facilitates selective protein degradation by utilizing the ubiquitin-proteasome system within cells.

Azide-PEG-azide (MW 20000) is a polyethylene glycol (PEG)-based linker compound used in the synthesis of Proteolysis Targeting Chimeras (PROTACs)[1].

m-PEG-NHS ester (MW 5000) is a PEG-based PROTAC linker utilized in the synthesis of PROTACs[1].

Azide-PEG-amine (MW 3500) is a polyethylene glycol (PEG) linker compound, designed for the synthesis of proteolysis targeting chimeric molecules (PROTACs)[1].

WSPC Biotin-PEG3-DBCO is a PEG-based linker for PROTACs that joins two essential ligands, facilitating the assembly of PROTAC molecules and enabling selective protein degradation via the ubiquitin-proteasome system within cells.

OICR-9429-N-C2-NH2, a ligand for WDR5, intermediate 2, serves as a crucial compound in the synthesis of PROTACs.

N-Boc-N-bis(PEG2-OH) is a cleavable ADC linker utilized in the synthesis of antibody-drug conjugates (ADCs)[1].

Lenalidomide-4-aminomethyl is a CRBN ligand derived from Lenalidomide, which is utilized for the recruitment of CRBN protein. By linking Lenalidomide-4-aminomethyl to the ligand, a PROTAC can be formed.

N-(PEG1-OH)-N-Boc-PEG2-propargyl is a polyethylene glycol (PEG)-based linker employed in the synthesis of proteolysis targeting chimeras (PROTACs).

N-Boc-N-bis(PEG4-OH) is a cleavable ADC linker utilized in the synthesis of antibody-drug conjugates (ADCs)[1].

Fmoc-N-amido-PEG2-alcohol is a PEG-based linker for PROTACs [which joins two essential ligands], crucial for forming PROTAC molecules and enabling selective protein degradation by leveraging the ubiquitin-proteasome system within cells.

N-(Boc-PEG4)-NH-PEG4-NH-Boc is a polyethylene glycol (PEG)-based PROteolysis TArgeting Chimera (PROTAC) linker designed for PROTAC synthesis [1].

Amine-PEG-amine (MW 3400) is a polyethylene glycol (PEG) -based linker used for synthesizing proteolysis-targeting chimeras (PROTACs)[1].

PROTAC ER Degrader-4 is a PROTAC degrader of the estrogen receptor (ER) with an IC50 of 0.8 nM.

m-PEG-CH2COOH (MW 2000) is a PEG-based PROTAC linker suitable for synthesizing PROTACs[1].

N-(m-PEG4)-N'-(PEG2-NHS ester)-Cy5 is a polyethylene glycol (PEG) based PROTAC linker used for PROTAC synthesis[1].

PROTAC BRD9 Degrader-4 is a bifunctional degrader that targets BRD9, specifically designed for applications in cancer research.

Acrylate-PEG-OH (MW 5000) is a Polyethylene Glycol (PEG)-based linker compound primarily utilized in PROTAC synthesis [1].

Pomalidomide 4'-alkylC6-azide, a Pomalidomide-based cereblon (CRBN) ligand, facilitates the recruitment of CRBN protein. It is designed to attach to a protein through a linker, enabling the formation of PROTAC [1].

N-Boc-PEG16-alcohol is a PEG-based linker for PROTACs, joining two essential ligands crucial for forming PROTAC molecules, and enabling selective protein degradation by leveraging the ubiquitin-proteasome system within cells.

Biotin-PEG12-NHS ester is a PEG-based PROTAC linker used in the synthesis of PROTACs.

N-Hydroxypropyl-N’-(azide-PEG3)-Cy3 is a polyethylene glycol (PEG)-based linker, specifically designed for the synthesis of proteolysis targeting chimeras (PROTACs) [1].